By admin
http://www.cwhdallas.com/simulator-sealed/
Simulator Sealed
 |
Independence War: Defiance
|
|
|
n the game, the player takes the role of an unnamed 23rd century spaceship captain in the Earth Commonwealth Navy. The primary opponents were rebellious insurgents called the Indies, a group distinguished by their elaborately and colourfully painted ships.
I-War was different from most other space combat games in that player commanded a big, 162 meter long corvette named the Dreadnaught, and because the space ships flew according to Newton's laws of motion. In other words, the flight model took into account inertia caused by a ship's mass and the absence of drag in outer space. In addition to common flight dynamics, the vessels could move and accelerate in all directions: up, down, forward, backwards and sideways. The piloting was however considerably eased thanks to a simulated flight computer with autopilot modes and an assisted flight mode.
The game had two options to play it - the campaign mode and a mode for immediate space battle with endlessly spawning enemies. The campaign was linear in nature and consisted of a series of about 40 different scripted missions. One or few were available at a time and after completing a key mission new one or ones would become available. Sometimes a different set of missions would be unlocked depending of the out come in the previous mission, thus setting the campaign to different directions. Three different endings to the campaign were possible. The nature of missions varied between various combinations of combat and problem solving. The puzzles often made use of the game's physics modeling.
Depending on the mission Dreadnaught could be acting alone, support another vessel or have a group of wingmen under her command. Commanding your companions well could be crucial to winning the mission. Other missions had various special equipment at the player's disposal, like for an example a reconnaissance drone.
|
 |
X-15A-2 Expansion Rocket Aircraft for FSX
List Price: $29.95
Sale Price: $52.50
|
|
|
This software is BRAND NEW. Packaging may differ slightly from the stock photo above. Please click on our logo above to see over 15,000 titles in stock.
|
 |
PROTOSTAR: War On The Frontier
Sale Price: $35.00
|
|
|
Mankind Is Irresistible Prey. The Skeetch Empire has viewed Human prosperity as an invitation for conquest. Now they have sealed the borders of Human space. With funds near depletion and constituency faith dwindling, the Human Alliance activates the PROTOSTAR DIRECTIVE - an agenda for unlimited covert tactics. YOU are enlisted to serve as the PROTOSTAR Agent for an operation of grave importance. Your objective is to disrupt Skeetch supply lines along the Galactic Frontier. You must assemble an experienced crew, battle hostile warships, maintain your finances and cover, channel funds to the Alliance, and win the support of alien factions. Your War On The Frontier may prove that mankind is more predator than prey!
|
Epoxy Coatings and Stains Can Transform Concrete Floors Into Artistic Masterpieces
More and more homeowners and businesses are creating that warm, easy-to-live-in feeling by taking advantage of their facilities' largest single surface, their floor. They are using new materials, including artistic stains, to give their concrete floors great individualized looks as well as the easy maintenance qualities of a Class III laboratory.
A recent example is provided by a project Durall Industrial Flooring undertook for John Engstrom Photography (www.engstromphotography.com) near Minneapolis, Minnesota. The goal of the flooring redevelopment work was to enhance the coffee house atmosphere of the photo studio.
Before the development began, Durall created a custom kit of materials tailored for this specific project. The first step was to use Durall's adhesive remover to remove the glue that remained from the carpeting and tile that formerly covered the warehouse-type facility floor. Because cement is so porous, even floors that look almost free of glue will yield great quantities of adhesive under the leaching action of the chemical removers, preventing future interference with the bonding of the new coatings.
A high-alkaline cleaner was then applied using a rotary scrubber with a stiff nilo grit brush. The high-alkaline degreaser brings the pH of the floor up to nearly 12 as it removes the leftover adhesive and contaminants. Following up with another scrubbing using Dura Klean, an acidic cleaner with water softeners, detergents, and rinse agents, shocks the floor with a pH of 3.5, thereby forcing contaminants and vulnerable cement particles to release from the floor. The acidic cleaner also opens the floor up, allowing the epoxy top coats to create a strong, long-lasting bond. A final scrub rinse and drying left the floor ready to accept repairs and artistic coloring.
The new look for the studio floors was produced using black and red stains shot downward with weed sprayers to give an alternating color look. Before staining began, masking tape was used to simulate a grid pattern, holding stain off mock grout lines. The pattern was laid diagonally across the floor to heighten dimension and interest. Two people, two sprayers, two colors—but just one artist—as the red was laid with the artist's eye and the helper followed, filling in unsprayed areas with black. Once dry, the tape was removed and two top coats of clear, flat catalyst epoxy were applied, leaving a soft, non-glare surface that is easy to keep clean and lets light softly dissipate.
The resulting floor brings together beautifully the grand wood, soft leather, and natural greenery of a studio that is functional, easy to keep up, and comfortable for those long hours of artistic development.
Durall Industrial Flooring supplies kits of materials that are customized to owner specification and delivered directly to the job site. Kits include full directions and 24/7 help lines staffed by seasoned flooring experts, so professionals and amateurs alike can successfully install a quality floor.
Web visitors can obtain free, job-specific quotes on materials or nationwide turnkey installations by completing a simple questionnaire at http://www.concrete-floor-coatings.com.
For a high-resolution photo example, visit: http://www.concrete-floor-coatings.com/photos/artistic
For more information, contact Harvey Chichester at: harvey@concrete-floor-coatings.com
Phone: 1-800-466-8910 or 952-888-1488 (24/7)
###
About the Author
Durall Manufacturing, Bloomington, MN, is the only industrial flooring manufacturer that also makes over 500 specialty cleaners. Durall's 40 years of flooring chemical manufacturing experience has produced a special preparation of cleaners and an application system assuring optimum flooring adhesion and wear results. Durall provides factory-direct support for these new products. Kits of materials are customized to owner specification and delivered directly to the job site. Kits include full directions and 24/7 help lines staffed by seasoned flooring experts, so professionals and amateurs alike can successfully install a quality floor. Visitors can obtain free, job-specific quotes on materials or nationwide turnkey installations by completing a simple questionnaire at www.concrete-floor-coatings.com. This full-service concept allows anyone to enjoy the benefits of industrial strength floors successfully.
I have bought a brand new sealed Flight Simulator X Gold but the product key does not work. Help please?
Any website or suggestions would be a help, i have Vista Home Premium 32 bit.
Thankyou Дмитрий Медведев for you answer, Please read the question again. Once again Thankyou!
Is it coming up with 'You have entered an illegal serial/Number not recognised' Error message??
ESA Presents European Participants in 520-day Simulated Mars Mission
BackgroundExtensive preparationsThe upcoming 520-day isolation study is the key part of the Mars500 program that began back in 2007. The first phase in November 2007 was a 14-day simulation that mainly tested the facilities and operational procedures. The second phase followed in 2009, when four Russian and two European crew-members were shut into the facility for 105 days on 31 March. One of ...
Thanks for visiting!