http://www.cwhdallas.com/pipes-floppies/
Pipes Floppies
 |
Startech Bracket For 3.5 Inch Floppy With Bezel List Price: $33.88 Sale Price: $17.89  |
|
Compatibility: 3.5" Floppy Drives. Green Compliant: Yes. Green Compliance Certificate/Authority: RoHS. |
 |
ASUS P6X58D Premium - LGA 1366 - X58 - DDR3 - USB 3.0 SATA 6 Gb/s - ATX Motherboard List Price: $299.99 |
|
Asus P6X58D Premium Motherboard Take advantage of the most significant architectural change in the x86 architecture in 13 years, the Intel Core i7. The ASUS P6X58D Premium introduces a new era for extreme performance. It is an X58-based motherboard that supports Intel's new generation extreme performance Core i7 Processors and both SLI and CrossFireX! Six SATA 3Gb/s ports with RAID 0, 1, 5, and 10 along two SATA 6Gb/s ports for ultra high speed transfer. Memory support includes up to 24GB of Triple Channel DDR3 memory. Intel has brought back Hyperthreading technology and combined it with a native quad-core design to give support for 8 separate threads in the new LGA1366 / Socket B CPU interface and their replacement for the old Front Side Bus technology, QuickPath Interconnect provides a system bus speed of up to 6.4GT/s. The three PCI-Express 2.0 slots to take full advantage of either 2 or 3 graphics cards, allowing up to four GPUs to be used for maximum graphics performance. |
Every laptop battery is given a power rating in order to show you, the consumer, about how long your battery should last before it needs to be recharged. These electrical specifications are given using volts (V) and milliAmps (mAh). For example, you may see your battery is given a rating of: 10.8V, 4000mAh.
Volts and milliAmp hours are used because they measure the amount of energy used by a laptop battery. A volt (V) is a measurement used for the amount of pressure the positive and negative electrodes produce in a battery during the process of discharging energy. Amps (A) measure the amount of resistance the energy in your battery produces in order to power a laptop.
Think of volts and amps in terms of a shower. When a shower is turned on half way, the water that goes through the pipe produces a certain amount of pressure. When you turn it on to its full amount, the water produces more pressure in the pipe. This pressure, or power, is similar to the volts a battery uses. If a laptop is running simple programs, little power is needed to discharge energy into a laptop. However, if a laptop is running a DVD movie or other high energy consumption applications, more power will be needed to discharge the necessary amount of energy to run the DVD movie.
You may also notice that increasing the size of the pipe and shower head without having to open the faucet all the way will produce similar results. This is an example of the amount of resistance in the flow of energy. Measuring this resistance is measured in terms of amps. In terms of a battery, the amount of resistance is dependant on the size of the battery and the amount of energy inside.
Battery life: A Few Things to Consider
Laptop ratings are given in terms of amp hours (Ah). Amp hours measure the length of time a battery will discharge energy before it needs charging. In order to adequately measure battery life, manufacturers use milliAmp hours (mAh). This means that every 1000mAh is equal to 1Ah. What does this mean for your new battery? If your original battery is measured at 2500mAh and your replacement battery is measured at 5000mAh, then your battery run time will double.
Keep in mind that technology constantly changes. Your old battery may be rated at a lower run time than a newer one because of technological advancements that have produced longer lasting batteries.
Additionally, your battery's run time depends on the programs you use. Some programs require more energy to run than others. Examples are: the screen (particularly if set at the brigh test setting), hard drives, CD and DVD drives, and wireless network cards. Unfortunately, there is no definite answer to the question, how long exactly will my laptop battery last? The key factor is how and what you use your laptop for.
One way of conserving power is to go to your Power Management settings icon in the Control Panel. You can shut off settings or programs you do not use. Also consider dimming your screen and shutting off your wireless card when you don't need it.
The Article writed by John, from http://www.power-depot.co.uk (Laptop Batteries UK Laptop Battery UK Power Tools Batteries); if your need any future assistance, please don't hesitate to contact us.
Free-Tel: 01772 454688 or E-Mail: info@power-depot.co.uk
How to Use Sprinkler Systems for Irrigation and for Control of Fire
Excerpts: Sprinkler systems are very important in the field of irrigation to get crop maturity with less amount of water. It is also used to minimize the effect of fire in vast areas.
Sprinkler system is mainly used for two purposes for irrigation and for controlling the effect of fire.
1. Sprinkler irrigation system:
Sprinkler irrigation system discharges water like rain fall. This is most effective as they cover the entire lands. This is suitable for wheat, gram, pulses, vegetables, tea, cotton and other types of crops. They spray water in small drops. They can be used in connection with pipes. Here water is allowed to flow by pumping. They are easy to install and maintain. They are strong and thus ensure long life. They are corrosion resistant. They are suitable for any type of soils. They may be made up of stainless steel or plastic. This system is the best one for irrigating lawns and crops with considerably less amount of water.
Sprinklers that spray in fixed patterns are known as sprays and they can be used under low pressure. High pressure sprinklers have impact mechanism. They can rotate in half or full circle. Floppy sprinklers are unique sprinkler system that does not have any moving parts. They are suitable for irrigating closely spaced crops. Full circle and part circle impact sprinklers are made up of stainless steel material and they ensure uniform rotation. Part circle sprinklers have adjustable arcs to rotate in all directions. So no area will be left dry.
2. Fire sprinkler systems:
Fire sprinkler system allows water flow under pressure to control fire. Previously they are used in factories and large industries. Now they are available in compact size to be used in small business concerns, homes etc. There are different types of Fire sprinkler systems. Wet pipe system has automatic sprinklers that will spray water under pressure through pipes connected to them. They are suitable for controlling fire in vast area. Dry pipe system uses air pressure to reduce fire. It is mainly used in unheated buildings or refrigerated coolers. It can be used in small areas. Deluge system has deluge valves to piping that supply water. This is more useful where fire spreads rapidly. Pre action system combines all the three systems. It is used in museums where books, rare arts etc are kept. It has two sub types. Single interlock and double interlock. Single interlock is just like dry pipe system and double interlock is similar to Deluge system. Foam sprinkler uses the mixture of water and foam that will result in foam spray from the sprinklers. This can be used in highly inflammable areas, air ports etc.
About the Author
Muna wa Wanjiru is an Agricultural Engineer and Has Been Researching and Reporting on Irrigation for Years. For More Information on Sprinkler Systems, Visit His Site at
why do baby's not need a pillow when there sleeping?
my son uses a pillow hes 6 months old (3 months corrected because he was premature) he has to use a pillow because he has larnygomalica, a relatively harmless condition were his wind pipe is "floppy" and his voice box collapses when he breaths in but he should hopefully grow out of it when they strengthen up. so his breathing is better when his head is slightly raised that is why we use a pillow. im just wondering why baby's don't use pillows anyway??
Newborns and young infants aren't supposed to sleep with blankets, pillows, anything. They squirm around in their sleep, and if they manage to pull the pillow (or blanket or whatever) over their face, they don't have the strength or coordination to pull it off and they suffocate! Or, they can roll over face down into the pillow!
If your using a regular pillow, that's no good! If the baby flips over in his sleep he may not be able to get back over and will be smothered in it.. If he has a special pillow for his breathing designed for babies to help prevent this, it's fine.
But most babies get so tired out just from being awake for a little while that they can fall asleep anywhere!
Thanks for visiting!
