http://www.cwhdallas.com/mfm-fdd/
Mfm Fdd
 |
 |
Western Digital 61-600173-02 MFM Fdd Hdd Controller WD1003V-MM2 F002 X8 |  |
US $40.00 | 25d 9h 25m |
 |
Western Digital 61-600173-02 MFM Fdd Hdd Controller WD1003V-MM2 F002 X8 |  |
|
US $34.30 | 10d 19h 54m |
 |
Western Digital 61-600173-02 MFM Fdd Hdd Controller WD1003V-MM2 F002 X9 | |
|
US $34.30 | 10d 19h 53m |
 |
Western Digital 61-600048-00 MFM FDD HDD WD10039 WA4 | |
|
US $49.00 | 7d 16h 53m |
 |
DTC 7280 16 bit MFM FDD HDD Controller | |
|
US $58.75 | 6d 21h 22m |
 |
Western Digital 61-600188-02 16 bit MFM FDD HDD Controller WD1003V-MM1 F002 X7 | |
|
US $34.20 | 1d 20h 23m |
 |
Western Digital WD1003-WAH 16 bit MFM FDD HDD Controller | |
|
US $34.20 | 1d 20h 23m |
 |
Western Digital WD1002-WAH 16 bit MFM FDD HDD Controller | |
|
US $28.00 | 1d 17h 46m |
 |
Western Digital WD6-VR 16 bit MFM FDD HDD Controller | |
|
US $32.80 | 1d 1h 7m |
 |
Western Digital 61-600192-02 AD2 MFM Fdd Hdd Controller WD1006V-MM2 F002 A&D2 | |
|
US $47.40 | 20h 14m |
 |
Western Digital 61-600195-02 A MFM Fdd Hdd Controller WD1006V-MM2 F002 A | |
|
US $47.40 | 20h 14m |
 |
Western Digital 61-600195-02 D MFM Fdd Hdd Controller WD1006V-MM2 F002 D | |
|
US $47.40 | 20h 14m |
| Powered by phpBay Pro |
| Account limit of 2000 requests per hour exceeded. |
Floppy Disk Drive Controller
A floppy disk controller (FDC) is a special-purpose chip and coupled circuitry that directs and controls reading from and writing to a computer's floppy disk drive (FDD).
A single FDC board can carry up to four floppy disk drives. The FDC is linked to the system bus of the computer and appears as a set of I/O ports to the CPU. It is also connected to a channel of the DMA controller. The FDC usually performs data transmission in DMA mode.
Usually an FDC communicates with the CPU via an Industry Standard Architecture (ISA) bus but an optional arrangement which is more usual in recent designs has the FDC included in a super I/O chip which communicates via a Low Pin Count bus.
Most of the FDC functions are performed by the FDC IC but some are performed by external hardware circuits.
FDC IC Functions
- Generating MFM format for the data to be recorded
- Decoding and executing commands such as seek, read, format etc
- Error detection by CRC generation / checking
- Data synchronization
External hardware functions
- Selection of FDD
- Switching-on motor in the FDD
- Resetting the FDC IC
- Enabling / disabling interrupt and DMA signals of the FDC IC
- Data separation logic
- Write pre-compensation logic
- Line drivers for signals to the FDD
- Line receivers for signals from the FDD
Input / Output ports
The FDC has three I/O ports. These are:
- Data port
- Main status register (MSR)
- Control port
The first two reside inside the FDC IC while the Control port is in the external hardware.
Data port
This port is used by the software for three different purposes:
- While issuing a command to the FDC IC, command and command parameter bytes are issued to the FDC IC through this port.
Main Status Register (MSR)
This port is used by the software to read the overall status information regarding the FDC IC and the FDD's.
Digital Control Port
This port is used by the software to control certain FDD and FDC IC functions.
About the Author
This article written by Tiel.
For more information, please visit: http://www.storagedepot.co.uk
Thanks for visiting!
